An empty chest in your iron farm does not tell you which part of the farm stopped. Before moving villagers or rebuilding the platform, watch the farm long enough to answer three questions: does a golem appear, where does it go, and does its iron reach storage?
Start with the last thing you changed. A new wall beside the workers calls for a different check from a new hopper under the collection chamber.

No golems: go back to the village
If this farm worked before, compare the villagers, beds and job blocks with the arrangement that worked. Look for a missing villager, a broken bed, a moved workstation or a new obstruction in the workers' room. Keep those checks separate from changes to the water or killing chamber.
In our riverside workshop, we placed 20 beds, 20 villagers and 20 fletching tables together. A naturally spawned golem appeared on the upper courtyard while it was still dry. We could watch where it appeared before adding the water and collection chamber.
Check the villagers you actually have. A baby or a green-coated nitwit is not a working adult. A villager wearing profession clothes also does not tell you whether it can reach its job block now. Look at the route to the tables and leave it open. Glass used to tidy up a room can still get in the way.

Stay nearby through ordinary daytime activity after restoring access. Do not replace every bed and table because nothing appeared in the first few seconds. If you went away while waiting, return to the farm and watch it there before deciding the change failed. Leave the beds and workers in their working arrangement while you investigate the next part.
Our quiet Bedrock workshop produced golems without a zombie beside the villagers. Use a Bedrock design when checking the layout; a Java farm built around scaring villagers is a different starting point.
Golems appear, but outside the water
A golem on the bank or a dry ledge changes the question. You now need to find out whether it appeared there or walked out of the collection area.
Watch the next appearance from a place where you can see both the intended floor and its edges. Check the dry rim, nearby ledges and any route out of the water. A golem standing somewhere is not enough to tell you where it started.
If it walks out, fix that escape route and keep the village arrangement unchanged. If you see it appear on an unwanted ledge, deal with that particular surface before enlarging the whole farm. Removing an unnecessary ledge may be a smaller repair than rebuilding the workers' room.
Then watch another golem. Changing beds, adding villagers and rebuilding the platform together makes it much harder to know which repair helped.
Golems appear, but the chest stays empty
Follow one golem through the entire route. Does the water carry it to the chamber? Does it remain caught on an edge? Does it die, and where do the drops land?
If it never reaches the chamber, inspect the flow at corners and changes of height. In our workshop, two golems reached the central trench and waited there while water kept coming in from both sides. Separating those side streams exposed dry stretches in the center. Shortening the flat runs before the drops put water back through those stretches.
Follow the water itself before changing the village. Check that it reaches the next drop, that another stream is not pushing against it, and that the golem actually crosses the join. Follow it all the way into the chamber.
If the golem dies but storage stays empty, inspect the hoppers. Their spouts need to lead toward the next hopper or the chest, their inventories need room, and an unintended redstone signal can lock them. Look for drops missing the hoppers or landing in lava as well.

Iron reached our storage after a naturally spawned golem died in the lower chamber. We also checked the hopper route with seeds, sending them from both outer sides into the chest and recovering them afterward.

Try one seed in your upstream hopper. If it arrives in the chest but the iron still does not, watch where the golem and its drops leave the route. That helps you choose between repairing the water, the chamber or the storage connection.
Keep the repair small
Restore one part, watch what happens, and follow the next golem all the way to storage. Leave the working parts alone while you fix the point where the route breaks.
For other practical builds, browse the Bedrock guides.
Comments 0
Share what worked, ask for help or reply to another player.
Use your Modonix account to join the discussion and manage your comments.
Sign in to commentNo comments yet. Share what worked for you.